Complete Fire Protection - Intumescent Pillows

Home

Profile

Intumescent Strip

Ventilation Grills

Downlighter Fire Covers

Door Upgrading System

Cable Passthrough System

Hinge & Lock Protection

Letterbox Protection

Electrical Trunking Closers

Intumescent Pillows

Intumescent Slabs

Recessed Ceiling Fan & Vent Sleeves

PVC Ventilation Duct Fire Sleeves

Ventilated Cavity Barriers

Socket / Switch Box Cover

Elelectrical Conduit

Cavity Barriers, Fire & Smoke Barriers

Pipe Fire Sleeves

Vent Duct Sleeves

Paints & Varnishes For Timber

Paints For Steel

Solutions For Fabrics, Imitation Flowers & Paper

FIREPLUG INTUMESCENT
PILLOWS

FIREPLUG PILLOWS FPP

Fireplug FPP can be used as a temporary or permanent fire stop in trunking and cable trays. They can also be used to fill small gaps.

FIREPLUG PILLOWS FPP

Fireplug Intumescent Pillows are high quality ceramic fibre pillows. Each pillow carries marking arrows to show the direction in which they are fitted.

SIZES
250mm x 250mm 70mm	72 No.per one metre square
250mm x 200mm x 40mm	120 No. per one metre square
250mm x 100mm x 30mm	1156 No. per one metre square

Under the action of heat the Fireplug FPP expand to seal an opening against the spread of fire and toxic gases.

Fireplug FPP pillows have been tested at FULMER YARSLEY to British standards BS476, part 22, test No. j85163/3.

FIRE RATING

The pillow should be laid so that the 250mm dimension forms the depth of seal.

For cable trays and PVC pipes under 50mm diameter -	4 HOURS
For PVC pipe penetration above 50m -	3 HOURS

The pillow should be installed so that the arrows form the depth of seal. All joints should be staggered. In trunking the pillow should be placed on top of the cables and should fit the trunking but allowing for free air movement so as not to impair the rating of the cable.

Keep out of reach of children.

Care should be taken not to puncture the pillow as small quantities of ceramic fibre are present.

FIREPLUG PILLOWS FPP

To ask questions or receive information about Fireplug Intumescent Pillows, please use the form below.

Name

Company

Telephone

Email

Enquiry

Complete Fire Protection Ltd. Unit 2, Ferry Steps Industrial Eastate, Albert Road
St Philips, Bristol BS2 0XW Tel 0117 971 1917 Fax 0117 971 1727

Pipe Bandages cable passthrough system suppliers pipe bandages and canisters downlighter protection covers ventilation grill manufacturer intumescent slabs intumescent pillows cable tray blocks fire protection boards complete fire protection fireplug fire protection materials cable passthrough system suppliers pipe bandages and canisters downlighter protection covers ventilation grill manufacturer intumescent slabs intumescent pillows cable tray blocks fire protection boards

complete fire protection, fireplug, fire protection materials, cable passthrough system suppliers, pipe bandages and canisters, downlighter protection covers, ventilation grill manufacturer, intumescent slabs, intumescent pillows, cable tray blocks, fire protection boardsComplete Fire Protection Limited. Manufacturers and suppliers of fire protection materials and fire protection boards. Also stock intumescent slabs and pipe bandages and canisters. Under the action of heat, the PVC profile complete fire protection, softens as the intumescent core expands sealing the gap between the door and the door frame, through which fire and toxic gas could pass. The amount of pressure fireplug, developed by the expanding intumescent is dependent on the gap to be sealed. The wider the gap the lower the pressure.. The temperature at which Fireplug Intumescent strip fire protection materials, starts to activate is 120 - 160 oC. At this temperature no one would survive on the fireside of the door and in most cases the thermal shock would be fatal to anyone cable passthrough system suppliers, on the unexposed side opening the door. However, despite the requisite that the pressure developed by the expanding intumescent is sufficient to downlighter protection covers, keep the door closed it is possible to make the door open if required. Perfomance Fireplug IFS104 and IF104 has been tested by TRADA to British Standards ventilation grill manufacturer, BS476 Part 22, on April 20th 1993, test No. FR1687. The test criteria attained in Fireplug Intumescent Strip being acceptable for use in many leading manufacturers intumescent slabs, doors for 30/30 half hour doors, likewise Fireplug IFS104 and IF104 has been tested for use on 60/60 one hour doors. Application Fireplug IFS104 and IF104 is fitted into a groove nominally 10mm wide x 4mm deep. To aid fixing, although not essential, the strip can have a self adhesive backing, alternatives to this are gluing or securing with tacks. intumescent pillows, IFS104 and IF104 are fixed similarly but the groove is nominally 20mm wide x 4mm deep. The groove can be routed into either the door or into the door frame. The rout is along the head of the door and down the jamb. Intumescent is not required along the bottom as in a fire situation a negative pressure results making the air flow in the opposite cable tray blocks, direction to the top. Where the groove is masked by hinges, locks or other door ironmongery we recommend that FIreplug Intumescent Strip is used in conjunction with Fireplug Hinge and Lock Protection.