Pipe Fire Sleeves Intumescent Pipe Canister fire protection for pipes ventilation ducting and cable bunches

PIPE FIRE SLEEVES

Firefly 109 Pipe Fire Sleeves are an intumescent solution providing fire and acoustic protection to combustible and non-combustible pipes, ventilation ducting and cable bunches when penetrating fire rated walls or floors.

The FF109 Pipe Fire Sleeves are ready to install providing a quick and easy solution without the need for foams, mastic or sealant. The Sleeves allow an effective fire, acoustic and thermal seal to be achieved in one visit, replacing the labour intensive over sleeving method.

The unique Fire Sleeve design allows for thermal movement whilst providing a vapour seal. In a fire situation, the intumescent material will crush and seal off plastic services replacing traditional pipe wraps and fire collars or provide a fire seal around metal services.

The FF109 Pipe Fire Sleeves are available for pipe diameters ranging from 15 mm up to 169 mm.

Applications

Pipe Penetrations
Circular Ventilation Ducting
Cable Bunches
Fire Resistant Walls/Floors
Acoustically Rated Walls/Partitions

Properties

2 Hour Fire Rated
Labour Saving
Acoustic Rated
No over sleeving required
Full range of sizes
Dry system - no need for additional sealants

Fire Testing Approvals

2 Hour Fire Tested to BS476: Part 20: 1987
Suitable for Plasterboard Partitions, Solid Walls/Floors and Mineral Fibre Batts
Assessment No.: Chilt/03187 Rev D / Chiltern Int. Fire.

Acoustic Testing Approvals

Tested in accordance with BS EN ISO 140-3:1995 and BS EN ISO 717-1:1997 under
UKAS conditions in a plasterboard partition construction.
Test No.: 239037 / Building Research Establishment (BRE).

Regulations

Meets the requirements of UK Building Regulations Approved Document B and E and HTM2045.

To ask questions or receive information about Pipe Fire Sleeves, please use the form below.

Top of Page

cable passthrough system suppliers pipe bandageand canisters downlighter protection covers ventilation grill manufacturer intumescent slabs intumescent pillows cable tray blocks fire protection boards complete fire protection fireplug fire protection materials cable passthrough system suppliers pipe bandages and canisters downlighter protection covers ventilation grill manufacturer intumescent slabs intumescent pillows cable tray blocks fire protection boards

complete fire protection, fireplug, fire protection materials, cable passthrough system suppliers, pipe bandages and canisters, downlighter protection covers, ventilation grill manufacturer, intumescent slabs, intumescent pillows, cable tray blocks, fire protection boardsComplete Fire Protection Limited. Manufacturers and suppliers of fire protection materials and fire protection boards. Also stock intumescent slabs and pipe bandages and canisters. Under the action of heat, the PVC profile complete fire protection, softens as the intumescent core expands sealing the gap between the door and the door frame, through which fire and toxic gas could pass. The amount of pressure fireplug, developed by the expanding intumescent is dependent on the gap to be sealed. The wider the gap the lower the pressure.. The temperature at which Fireplug Intumescent strip fire protection materials, starts to activate is 120 - 160 oC. At this temperature no one would survive on the fireside of the door and in most cases the thermal shock would be fatal to anyone cable passthrough system suppliers, on the unexposed side opening the door. However, despite the requisite that the pressure developed by the expanding intumescent is sufficient to downlighter protection covers, keep the door closed it is possible to make the door open if required. Perfomance Fireplug IFS104 and IF104 has been tested by TRADA to British Standards ventilation grill manufacturer, BS476 Part 22, on April 20th 1993, test No. FR1687. The test criteria attained in Fireplug Intumescent Strip being acceptable for use in many leading manufacturers intumescent slabs, doors for 30/30 half hour doors, likewise Fireplug IFS104 and IF104 has been tested for use on 60/60 one hour doors. Application Fireplug IFS104 and IF104 is fitted into a groove nominally 10mm wide x 4mm deep. To aid fixing, although not essential, the strip can have a self adhesive backing, alternatives to this are gluing or securing with tacks. intumescent pillows, IFS104 and IF104 are fixed similarly but the groove is nominally 20mm wide x 4mm deep. The groove can be routed into either the door or into the door frame. The rout is along the head of the door and down the jamb. Intumescent is not required along the bottom as in a fire situation a negative pressure results making the air flow in the opposite cable tray blocks, direction to the top. Where the groove is masked by hinges, locks or other door ironmongery we recommend that FIreplug Intumescent Strip is used in conjunction with Fireplug Hinge and Lock Protection.