0117 971 1917 enquiries@cfpltd.co.uk


Fireplug FPG Intumescent Grills are made to order so can be supplied in any size.

Visit Our Online Shop


Fireplug FPG Intumescent Grills are made to order so can be supplied in any size.

Fireplug FP louvred face plates are made in 50mm increments ranging from 100mmx100mm and are nominally 30mm larger in both height and width than the FPG intumescent grill to allow for surface mounting. Standard colour is white other colours and stainless steel are available.

Fireplug FP: Free air flow is calculated at 65%.

Firelug FPG: Free air flow has been calculated to give a minimum of 50% for a 100 x 100mm – Rising to 76% and higher for a 300 x 300mm and upwards.

Under the action of heat, the openings seal up to prevent the passage of hot gases and toxic fumes.

Fireplug FPG & FPCG grills are available for one hour fire resistance and were tested at Chiltern Fire Laboratories under Test No. Chilt/IF05088 & IF11025A.

Tested to BS EN 1634 & BS476 Pt 20 acheiving one hour fire resistance, Test documents available on request.

Fireplug FPG are designed to suit most firedoors. Simply cut a hole in the door to give a tight fit around the FPG, a bead of intumescent mastic can be place around the perimeter of the FPG, between the grill and timber, to seal the surrounds if required. Fireplug FP can now be surface mounted each side of Fireplug FPG.

Download Horizontal Grill IF12003 Test Certificate
Download Vertical Grill IF11025A Test Certificate

Get a Quote For Your Project

Contact Us

Unit 2/Ferry Steps Industrial Est/Albert Rd, St Philips Bristol BS2 0XW

0117 971 1917